ER20S-MHFFPD 1 1/4 UNMTD BALL BRG

10440903 MFG #: Link-Belt
$0.00 /
Link-Belt ER20S-MHFFPD Unmounted Replacement Bearings Ball Bearings
  • Bore Size (in): 1.25 in
  • Locking Type: Set Screw
  • Seal Type: Flingers Only - Free Running
  • Available Seal Type: N Lip Seal;E1 Viton Seal;FF Free Running;HFF Free Running;MHFF Free Running;NFF Lip Seal w/ Flinger
  • Bearing Coating Material: BLACK OXIDE
  • Bore Length (in): 1 1/2 in
  • C Dynamic Load Rating: 4390 lb
  • Co Static Load Rating: 2530 lb
  • Distance from Inner Ring Long Hub Face to Centerline of Setscrew (in): 1/4 in
  • Distance from Outer Ring Face to Snap Ring Face (in): 3/32 in
  • Height: 2.00
  • Inner Ring Fillet Radius (in): 0.04 in
  • Inner Ring Hub Diameter (in): 1.587 in
  • Length: 3.00
  • Lubrication Type: PRESERVATIVE ONLY - NO GREASE
  • Maximum Speed (RPM): 9800 rpm
  • Maximum Temperature (C): 107 C
  • Maximum Temperature (F): 225 F
  • Mounted Clearance: C3 STANDARD
  • Net Weight: 0.78
  • Outer Ring Width (in): 0.8740 in
  • Outside Diameter (in): 2.44 in
  • Primary Seal: FLINGERS ONLY
  • Retainer Type: NYLON
  • Setscrew Torque (in-lbs): 87-92 in/lbs
  • Short Hub Length (in): 5/8 in
  • Size Code: 206
  • Snap Ring Outside Diameter (in): 2 21/32 in
  • Snap Ring Width (in): 3/64 in
  • Special Lube Percent: 0% FILL
  • Unit of Dimension: IN
  • Vibration Frequency Fundamental Train: 0.0067 cps
  • Vibration Frequency Inner Ring Defect: 0.0905 cps
  • Vibration Frequency Outer Ring Defect: 0.0595 cps
  • Vibration Frequency Roller Spin: 0.0385 cps
  • Weight unit: LB
  • Width: 3.00
1 1/4" Unmounted Ball Bearing, Standard Duty, Setscrew Locking, flingers only, preservative only - no grease
QTY
Add to List